baxter Hillrom Proqressa+ - Bed Exit Alert; Turn on the Alert

Graphical Caregiver Interface (GCI) Controls
32 Progressa+ Bed Instructions for Use (216321 REV 2)
BED EXIT ALERT
Bed Exit Mode Descriptions
The Bed Exit Alerts system has three levels of sensitivity settings to select from:
An audible alert will sound and a RemindMe screen will
show to alert the user of the reminder.
3. Press Reset or Off.
• Patient Position Mode—the mode alerts when the patient changes
position. This mode should be used when a caregiver wants to be
notified when the patient begins to move to either siderail or if the
patient sits up in bed.
• Exiting Mode—this mode alerts when the patient moves away from
the center of the bed towards the edge of the bed. This mode should be
used when a caregiver wants to be notified when a potential bed exit is
attempted.
• Out of Bed Mode—this mode alerts when the patient’s weight has left
the bed. This mode should be used when the caregiver wants the
patient to move freely within the bed, but to be notified when the
patient leaves the bed.
Turn ON the Alert
1. Make sure the patient is centered on the bed and aligned with the hip locator.
2. Press the Alerts menu control.
3. Press Bed Exit.