baxter Hillrom Proqressa+ - Page 140

Surface (mattress) and Bed Frame Compatibility
128 Progressa+ Bed Instructions for Use (216321 REV 2)
Chair Egress with
StayInPlace Feature
P7540A0110000
Chair Egress with
StayInPlace Feature
(40" (102 cm) wide
Xtend)
P7540A1110000
P7540A0120000 P7540A1120000
P7540A0111000 P7540A1111000
P7540A0121000 P7540A1121000
Progressa Therapy and Pulmonary P7520A Surfaces
The P7520A surfaces must not be used with an Xtend (wide) bed.
The P7520A surfaces may only be used with narrow (non-Xtend) beds with P&V therapy.
If a P7520A surface is detected on a Progressa+ bed (P7501A) that is
not configured as a full pulmonary bed, the software will provide an
audible and visual indication to the user since the bed will be unable
to provide airflow for the MicroClimate Management (MCM). The
following screen will appear on the Graphical Caregiver Interface
(GCI).
Accelerate Surface
Frame
Compatible Surface
Product Numbers
(See the surface product label at
the head end of the surface.)
Xtend Frame
Compatible Surface
Product Numbers
(See the surface product label
at the head end of the
surface.)