Bed Frame Features
Progressa+ Bed Instructions for Use (216321 REV 2) 83
Bed Setup with the use of a C-Arm
1. Set the brakes.
2. Lockout all articulation controls before you position the patient in the mobile scanner.
Figure 1: Artifact Evaluation Locations
Twelve locations were evaluated for surface
artifacts (see Figure 1). Below shows the surface
artifacts that were found.
The surface artifacts can include the following:
•metal coils
•non-metal tubing
• non-metal fastener components
•fittings
•mesh material
Progressa+ Advance Surface and Accelerate Surface Artifact Locations
Progressa+ Accelerate Surface shown
Essential Surface Artifact Locations
To Next Page
Loading...
