BeneVision N1 - Parts Identification and Lists; Introduction to Parts

9-1
9 Parts
9.1 Introduction
This chapter lists the exploded views of the main unit and all the parts and part numbers of the repairable parts. It helps
the maintenance personnel to identify the parts during disassembly and part replacement. The part numbers listed in
the "Part Number" columns of all parts lists are used only to assist the maintenance personnel in searching for the
corresponding FRU part numbers. Please provide the FRU parts numbers if you want to purchase the spare parts.
The figure below shows the hardware architecture of the N1 main unit:
Interface board
assembly
Main frame
Multi
-parameter
board
Main board
Other parts
Infrared backboard
Rear housing
assembly
Display
assembly
Main unit
Installation sequence
NOTE
 The part numbers listed in the "Part Number" columns of all parts lists are used only to assist the
maintenance personnel in searching for the corresponding FRU part numbers. Please provide the FRU
parts numbers if you want to purchase the spare parts.