5-20
5.9.8 Battery Information
Access the Battery1 and Battery2 menus to view the battery status of the monitor.
5.9.9 Clinical Data
Access the Clinical DataCollection menu to perform settings related to clinical data collection.
When Clinical Data Location is set to None, the clinical data is stored on the monitor. You can export the data to the
USB drive in the way of log export.
When Clinical Data Location is set to Udisk, the clinical data is directly stored on the USB drive.
5.9.10 Clinical Data Transfer
Access the Clinical Data Transfer menu to select clinical data to be sent.
5.9.11 Software Version
Select the Main Menu quick key →go to the third page → select Maintenance from the System column → enter the
factory maintenance password → select OK→ select Version. Then you can view all software versions in the system.
1) System Software Version
2) Kernel Version
3) MPM Version
4) MPM Type
5) ECG Algorithm Type
6) CO
2
Module Version
7) SpO
2
Module Version
8) CCO Module Version
9) Handle Version
10) M4 Version
11) Power Firmware Version
12) Uboot Version
13) Touch Screen Controller Version
14) Wi-Fi Firmware Version
To Next Page
Loading...