3-2
3.2.1 Output List
Operation Output Requirement Template
A0 Wireless network requirements of
the Mindray patient monitor
Determine the wireless network
deployment requirements of the
Mindray patient monitor.
Wireless network
requirement table
A3 Network acceptance report Check if the customer's network meets
the requirements of the Mindray patient
monitor through questionnaire survey
and measurement.
Wireless network
acceptance table
A5 Installation confirmation report Confirm the actual operation of the
Mindray patient monitor after
installation.
Patient monitor
installation confirmation
table
If the hospital plans to establish a new WLAN for the Mindray patient monitor, make sure that at least one Wi-Fi channel
is idle. Otherwise, after the new WLAN is established, it cannot meet the requirements of the Mindray patient monitor in
terms of co-channel interference. The installation process is as follows:
Figure 3-2 New WLAN installation process
To Next Page
Loading...