Benning ST 755+ - Backup Copies; Table 16 Database Contents

Functions
7.2 Backup copies
5284 / 08/2023 en BENNING ST 755+ / ST 760+ 35
Parameter Description
Number The number of test samples is displayed depending on the three parameters
"Database", "Customer" and "Department".
IDno./
designation
These parameters are intended to manage test samples. The identification
number and test sample designation (“device”) are entered for the unique
naming of test samples.
If there are already test samples in the database, the parameters of the last
test sample created are automatically used for entering a new test sample.
The use of previous test sample parameters helps to quickly create identical
test samples (extension cables, multiple sockets etc.).
Designation If a test sample is selected, these parameters are automatically taken over
from the test sample data ("Device" screen).
Test acc. to
Protection class
Test procedure
Table16: Database contents
7.2 Backup copies
You can copy your database as well as measured values to your PC for backup.
To do this, use the medium of the selected storage location (SDcard, USBstick) or connect to
the device with a USBcable and access the data.
BENNINGPC-Win ST750‑760
The logging software is intended to manage databases and enables the following functions:
• Create new databases
• Export databases
• Import existing databases
• Edit, merge, clean, repair, compress databases
• Control the print output
• Create customer-specific test procedures
• Create customer-specific visual inspections
• Subsequently edit existing test reports
Backward compatibility
The ST755+/ ST760+ is backward compatible with the ST755/ ST760. If you also work with
the ST755/ ST760, you can transfer the data to the ST755+/ ST 760+.
Forward compatibility
The data from the ST750 can be converted into the database format of the ST755/ ST760/
ST755+/ ST760+ using the logging software.