Benning ST 755+ - Creating a Customer-Specific Visual Inspection; Creating Customer-Specific Test Procedures

Configuration
8.4 Managing the expert settings
5284 / 08/2023 en BENNING ST 755+ / ST 760+ 61
8.4.2 Creating a customer-specific visual inspection
The “Customer-specific visual inspection”menu is intended to manage individual test questions.
Requirements
• You are logged on to the device as a user with admin status.
Menu
“Settings> Expertsettings> Customer-specificvisualinspection”
Setting options
• New (create)
• Change
• Copy
• Delete
Result
Created test questions will be saved and displayed on the “Questions" screen.
8.4.3 Creating customer-specific test procedures
The “Customer-specific test procedures”menu is intended to create and manage test
procedures for specific device types, deviating tests or special test states.
Requirements
• You are logged on to the device as a user with admin status.
Menu
“Settings> Expertsettings> Customer-specifictestprocedures”
Setting options
• New (create)
• Change
• Copy
• Delete