Benning ST 755+ - Table 22 Test Procedure Screen

8.4 Managing the expert settings
Configuration
5284 / 08/2023 enBENNING ST 755+ / ST 760+62
When you create or edit a test procedure, the “Testprocedure” screen opens. The following
settings can be made for the individual test procedure:
Parameter Description
VDE Select the test standard.
Protection class Selects the protection class.
Visual inspection Enables/ disables the visual inspection.
Connection test Enables/disables the connection test
[}page40].
RPE600mA Enables/disables the protective conductor
resistance measurement with 600mA.
RPE10A Enables/disables the protective conductor
resistance measurement with 10mA.
RInsu-1/ RInsu-IN Enables/ disables the insulating resistance
measurement.
RInsu-2
RInsu-3
RInsu-4
RInsu-OUT
IPE Disables the protective conductor current
measurement or selects the measuring
method.
ICont Disables the contact current measurement or
selects the measuring method.
Funct. Selects the measuring method for the
functional test.
Cable Enables/ disables the continuity test.
Ua Enables/ disables the output voltage
measurement.
PRCD Selects the PRCDtype.
PRCD current intensity Selects the tripping current of the PRCD.
Table22: “Test procedure” screen