Benning ST 755+ - Page 68

8.6 Managing a database
Configuration
5284 / 08/2023 enBENNING ST 755+ / ST 760+68
Procedure– “Copy”
1. Select the “IDno.” line. To do this, tap the line on the left of the list.
2. Tap the “Copy” button in the footer.
The “Device” screen is displayed.
3. Select the “IDno.” parameter. To do this, tap the line on the right.
An input window opens.
4. Enter the desired identification number and confirm it with the “Enter”button.
5. Adjust other parameters if desired.
6. Save the change. To do this, tap the “Save”button.
A new test sample is stored in the database.
Procedure– “Delete”
1. Select the “IDno.” line. To do this, tap the line on the left of the list.
2. Tap the “Delete” button in the footer.
The query “Do you really want to delete the device ...?” is displayed.
3. Confirm the query.
The test sample is deleted from the database.