9.4 Manual testing
Testing
5284 / 08/2023 enBENNING ST 755+ / ST 760+78
9. When you have carried out all the required individual tests, complete the test procedure. To
do this, tap the “Done”button on the overview screen of the individual tests.
The test report "Test result" is displayed.
10. Select a test sample from the database in the “Device”line or create a new test sample.
11. Select the test type.
12. You can enter an additional comment in the “Note”line.
13. To complete the test procedure, select the desired option (print, discard or save) with the
“Testresult” test report.
To Next Page
Loading...
