Bosch Rexroth IndraDrive CsDrive System with HCS01 User Manual

Description Symbol Unit
HCS01.1E
-W0003-
_-02
HCS01.1E
-W0006-
_-02
HCS01.1E
-W0009-
_-02
HCS01.1E
-W0013-
_-02
HCS01.1E
-W0018-
_-02
Three-phase mains voltage at IT
mains
1)
U
LN
V 110...230
Three-phase mains voltage at
Corner-grounded-Delta mains
2)
U
LN
V 110...230
Tolerance rated input voltage U
LN
% ± 10
Minimum short circuit power of the
mains for failure-free operation
S
k_min
MVA 0.02 0.03 0.05 0.1 0.2
Minimum inductance of mains
supply (mains phase inductance)
3)
L
min
µH 40
Assigned type of mains choke -
Inrush current
I
L_trans_max
_on
A See figure
Maximum allowed ON-OFF cycles
per minute
4)
1
Mains input continuous current at
U
LN_nenn
and P
DC_cont
(single-
phase, without mains choke)
5)
I
LN
A 1.80 2.80 5.00 8.30 12.80
Mains input continuous current at
U
LN_nenn
and P
DC_cont
(three-phase,
without mains choke)
6)
I
LN
A 0.60 1.20 2.30 4.50 9.60
Mains input continuous current at
U
LN_nenn
and P
DC_cont
(single-
phase, with mains choke)
7)
I
LN
A -
Mains input continuous current at
U
LN_nenn
and P
DC_cont
(three-phase,
with mains choke)
8)
I
LN
A -
Nominal current AC1 for mains
contactor at nom. data
ILN
Mains fuse according to
EN 60204-1 (single-phase, with‐
out mains choke)
A 4;gG 6;gG 10;gG 16;gG
Mains fuse according to
EN 60204-1 (three-phase, without
mains choke)
A 2;gG 4;gG 6;gG 16;gG
Mains fuse according to
EN 60204-1 (single-phase, with
mains choke)
A -
Mains fuse according to
EN 60204-1 (three-phase, with
mains choke)
A -
Last modification: 2012-06-28
Bosch Rexroth AG DOK-INDRV*-HCS01******-PR05-EN-P234/341
Rexroth IndraDrive CsDrive Systems with HCS01
Technical data of the components

Bosch Rexroth IndraDrive CsDrive System with HCS01 Specifications

General

Brand	Bosch
Model	Rexroth IndraDrive CsDrive System with HCS01
Category	DC Drives
Language	English