Bosch Rexroth IndraDrive CsDrive System with HCS01 - Page 285

Connection Signal Function
12 +5V Encoder supply 5V
13 n. c.
14 n. c.
15 Sense Return of reference potential (Sense line)
Connector
housing
Overall shield
Tab. 8-18: Pin Assignment
Hall X4.In2
View Identification Function
Hall
X4.In2
Hall sensor connection
D-Sub 9-pin, male Unit Min. Max.
Connection cable
Stranded wire
mm
2
0,25 0,5
Tab. 8-19: Function, Pin Assignment, Properties
Connection Signal Function
1 +12 V Power supply
2 S1 Hall sensor signal 1
3 GND Reference potential for power supply
4 S2 Hall sensor signal 2
5 GND Reference potential for power supply
6 GND Reference potential for power supply
7 GND Reference potential for power supply
8 S3 Hall sensor signal 3
9 GND Reference potential for power supply
Connector
housing
Overall shield
Tab. 8-20: Pin Assignment
DOK-INDRV*-HCS01******-PR05-EN-P Bosch Rexroth AG 283/341
Rexroth IndraDrive CsDrive Systems with HCS01
Cables, accessories, additional components