BradyPrinter S3100 Sign & Label Printer User’s Manual
114
Pipe Markers
Create Pipe Marker Labels
6. In the Graphics dialog:
a. Touch the graphics you want to include on the label. Selected graphics
are highlighted and the total number of selected graphics immediately
updates. A maximum of 4 graphics are allowed.
Note: To deselect a graphic, touch the graphic again.
b. If necessary, press the Change Category button to choose from a
different set of graphics. You can select graphics from more than one
category.
7. Touch Finish.
8. If desired, edit the data by touching the Edit Pipe Marker Data button
in the Pipe Marker control panel. Not all fields are editable.
9. Install the correct ribbon and tape as necessary, and print the label.
To Next Page
Loading...
