Brompton Technology Tessera M2 - Page 16

- 16 -
D
Reference Input
Used for analog bi-level or tri-level sync.
E
DMX 512-A Input
For DMX real-time control.
F
3G-SDI Input
Two 3G-SDI inputs are available. Both inputs can be used concurrently. The SDI inputs
support up to 3G-SDI level A or level B. Both inputs can be used together to support
Dual Link HD-SDI.
G
Loop Thru Ports
All video inputs and syncs have re-clocked loop thru ports.
H
DisplayPort Input
Not currently implemented.
I
Gigabit Ethernet Outputs
The M2 processor has four Ethernet outputs which are provided on EtherCON
connectors. Fixtures should be connected with gigabit Ethernet cable (Cat-5e or
above). For more information on Ethernet connection see "Connecting Fixtures" on
page37.
J
On/Off Switch
The processor can be turned off from the power switch. It can be shutdown from the
local interface or remote computer. No harm will result from turning the processor
off at the switch.
K
IEC Mains Input
The input is auto ranging from 100-250v/47-63Hz
L
DMX512-AInput and Thru
For DMXreal-time control
M
Remote Control Ports
The M2Bhas two Gigabit Ethernet ports for Remote Control. These act like a switch
and can be used for daisy-chaining in to other Tessera processors.