- 116 -
Colour Adjustment
Colour Adjustment allows powerful 7 way colour correction of fixtures or fixture modules,
but with a quick and intuitive user interface.
To access Colour Adjustment of fixtures then select the Fixture icon on the OSCAtoolbar or
press F8, and to adjust modules select the Modules icon on the OSCAtoolbar or press F7
Figure 11-14. Icons for selecting module or fixture Colour Adjustment on the OSCAtoolbar
Selecting Fixture or Module for Colour Adjustment allows colour correction on a fixture
basis or on a module basis. The canvas will allow the selection of fixtures or modules
respectively:
To Next Page
Loading...