Brompton Technology Tessera M2 - Using Presets to Crossfade between Inputs

- 79 -
Right-click on a preset recall button to rename or delete it.
Using Presets to Crossfade Between Inputs
Switching inputs can be achieved by creating a Video (V) preset for each input. This is a
feature only available on M-Series processors.
To assign crossfade times to these presets right click on each preset and select properties.
The properties of each preset will now appear in the properties tab and there is an option
here to assign a crossfade time.
Note. The cross fade time does not apply to Colour and Position parameters or any of the other
Video parameters except input selection.