- 98 -
Chapter 11 - Remote Applications
Tessera Remote Application
Tessera Remote is a free Windows PC and Mac OS application that allows remote control of
Tessera processors across a network. Additionally the Remote application can be used as an
‘offline editor’, allowing the set up and editing of Tessera projects when away from a physical
processor.
Tessera Remote is downloadable from the Brompton Technology website:
http://bromptontech.com/support#downloads
Installation for Mac OS X
1. Download the application. It is packaged in a .dmg file. By default this should down-
load to the Download folder.
2. Double click on the .dmg file. This opens up the Tessera Remote .dmg package
3. Drag the Tessera Remote icon into the Applications Folder, or copy (⌘ – C) and Paste
(⌘ – V) the Tessera Remote icon into Applications folder
4. You can have multiple software versions of the Tessera Remote Application on the
same Mac computer. You may find it helpful to store these in different folders within
the Applications folder.
Note Tessera Remote Application software versions and the processor firmware versions must
match. If the processor firmware version and Tessera Remote Application do not match then
you will not be able to connect remotely to the processor.
Installation for Windows PC
1. Download the application. It is packaged as a self-extracting .exe file.
2. Double click on the self-extracting .exe file’s icon – the file is named Tessera_Remote_
vx.y.z_installer.exe, where x.y.z is the software version.
3. This opens the Setup Wizard. Hit Next to continue.
To Next Page
Loading...