- 86 -
1x Channel to trigger up to 127 user definable presets.
Input Controls - (30 channels total if fully assigned)
3x Assignable controls of Input Colour management parameters.
Input Controls+ - (36 channels total if fully assigned)
1x Global control of Red, Green, Blue and Intensity Gain.
3x Assignable controls of Input Colour management parameters.
1x Video Mode selection channel.
1x Preset activation channel.
Since some of the sets of parameters that make up these profiles are repeated and some are
common to more than 1 profile it is possible to control all the profiles with 5 suggested DMX
libraries (See section x.xx). For an up to date breakdown of the channel assignments of the
stock profiles and suggested console library files to control them please refer to the latest
DMX Profiles Listing which can be downloaded from the support page of the Brompton web
site:
www.bromptontech.com/support
Assign controls to a Group or Input
Some Control Profiles that contain multiple sets of group or input controls allow users the
ability to assign each set of controls to a single group (of fixtures) or input (DVI or SDI).
This control is in the form of a drop down menu for each set in the Channel column. When a
new profile is selected all user assignable sets will have the legend “No assigned group” or
in the case of input controls “No assigned video input”.
For Fixture Groups
Clicking on this legend will reveal a drop down menu showing all the available fixture groups
that have been created in that project file. Please note if no fixture Groups have been
created the Menu will have only one option “None” but once fixture groups have been
created and or named they will appear below in the order in which they were created.
To Next Page
Loading...