- 85 -
Figure 9-10. Control profile configured with Live Control active
Figure 9-11. Control profile configured and Live Control disabled.
A selection of Control Profiles that can be used to control various parameters are included in
the processor. These profiles are intended to cover the majority of use cases. However
where necessary it is possible to modify and create new Control Profiles to suit a particular
application. For details on how to do this please contact support@bromptontech.com.
The default Control Profiles contained in the V1.2 firmware are:
Colour - (28 Channels total if fully assigned)
1x Global control of Red, Green, Blue and Intensity Gain.
6x Group assignable sets of Red, Green, Blue and Intensity Gain controls.
Groups - (60 Channels total if fully assigned)
6x Assignable sets of group position, orientation and Red, Green, Blue and Intensity Gain
controls.
Preset Activate (1 Channel)
To Next Page
Loading...