Brompton Technology Tessera M2 - Fixture Test Patterns

- 71 -
To turn off test patterns click on the icon again and it will turn grey.
To change test pattern click on the small white triangle to the right of the icon and it will
give a selection of test patterns as shown in figure X.
Custom Test Patterns allows custom test pattern bitmaps to be loaded into the processor.
Fixture Test Patterns
In addition to the processor test patterns it is possible to trigger test patterns on individual
fixtures or groups of fixtures by selecting them in the canvas. The test pattern can then be
triggered from the Properties tab.
On some fixtures it is also possible to trigger these test patterns using a self test button on
the back of the tile (refer to fixture manufacturer documentation for specific functionality).
Beacon
The beacon tool allows the user to highlight a particular fixture in the system from the
canvas window. This can be particularly useful when trying to identify panel products with a
fault