2-23
Confidential
Error Code 0E
In duplex printing, a sensor error has occurred during printing on the second side. (During
switchbacking, the combination of the sensing states of the registration sensor, switchback
paper sensor, and paper feed sensor has become unexpected.)
User Check
- Remove the jammed paper.
- Check whether the recording paper being used is within the specification.
- Check that the recording paper is not curled.
- Clean the switchback (SB) roller.
Paper Jam
LCD
Step Cause Solution
1 Switchback paper detection
actuator caught on the
surrounding parts
Reposition the actuator.
2 Paper feed sensor actuator caught
on the surrounding parts
Reposition the actuator.
3 Registration sensor actuator
caught on the surrounding parts
Reposition the actuator.
4 Switchback paper sensor
defective
Replace the sensor PCB ASSY.
5 Paper feed sensor defective Replace the PF encoder/PF sensor harness unit.
6 Registration sensor defective Replace the registration sensor PCB ASSY.
7 Main PCB defective Replace the main PCB ASSY.
To Next Page
Loading...
