Brother MFC-J6510DW

2-24
Confidential
 Error Code 0F
In duplex printing, a recording paper jam has occurred. (During printing on the second side, the
switchback paper sensor does not go OFF even after the recording paper is fed for the specified
paper feeding amount.)
User Check
- Remove the jammed paper.
- Check whether the recording paper being used is longer than the specified limit.
- Clean the switchback (SB) roller.
 Error Code 13
In duplex printing, a sensor error has occurred during printing on the second side. (During
printing on the second side, the user has drawn out recording paper or bypass-fed paper.)
User Check
- Remove the jammed paper
- Clean the switchback (SB) roller..
Paper Jam
LCD
Step Cause Solution
1 Switchback paper detection
actuator caught on the
surrounding parts
Reposition the actuator.
2
Main PCB defective
Replace the main PCB ASSY.
Paper Jam
LCD
Step Cause Solution
1 Switchback paper detection
actuator caught on the
surrounding parts
Reposition the actuator.
2 Paper feed sensor actuator caught
on the surrounding parts
Reposition the actuator.
3 Registration sensor actuator
caught on the surrounding parts
Reposition the actuator.
4 Switchback paper sensor
defective
Replace the sensor PCB ASSY.
5 Paper feed sensor defective Replace the PF encoder/PF sensor harness unit.
6 Registration sensor defective Replace the registration sensor PCB ASSY.