Brother MFC-J6510DW

2-32
Confidential
 Error Code 31
Cannot detect the origin of the carriage. (Detected by the CR encoder)
User Check
- Remove foreign materials.
 Error Code 32
Capping load large.
User Check
- Remove the jammed paper.
Paper Jam
LCD
Step Cause Solution
1 Foreign materials on the CR
timing belt or around the head/
carriage unit
Remove foreign materials.
2 Switching lever guide out of place Reposition the switching lever guide.
3 CR encoder strip stained Replace the encoder strip.
4 Maintenance unit defective Clean the maintenance unit or replace it.
5 Main PCB defective Replace the main PCB ASSY.
Unable to Print 32 / Unable to Clean 32 / Unable to Init. 32
LCD
Step Cause Solution
1 Switching lever guide out of place Reposition the switching lever guide.
2 Leveler roller (LR) ASSY not
mounted correctly on the head/
carriage unit
Set the LR ASSY into place, using the LR jigs (LR
positioning jig and LR fitting jig).
3 Maintenance unit defective Clean the maintenance unit or replace it.