Brother MFC-J6510DW

2-33
Confidential
 Error Code 35
Head/carriage unit stopped during printing. (Error caused by any problem except a paper jam
when ink is not being jetted out)
User Check
- Remove the jammed paper.
 Error Code 38
Head/carriage unit stopped during printing. (Error caused by a paper jam when ink is not being
jetted out)
User Check
- Remove the jammed paper.
Unable to Print 35 / Unable to Clean 35 / Unable to Init. 35
LCD
Step Cause Solution
1 Foreign materials on the CR
timing belt or around the head/
carriage unit
Remove foreign materials.
2 Switching lever guide out of place Reposition the switching lever guide.
3 Leveler roller (LR) ASSY not
mounted correctly on the head/
carriage unit
Set the LR ASSY into place, using the LR jigs (LR
positioning jig and LR fitting jig).
4 CR encoder strip stained Replace the encoder strip.
5 Maintenance unit defective Clean the maintenance unit or replace it.
Paper Jam
LCD
Step Cause Solution
1 Foreign materials on the CR
timing belt or around the head/
carriage unit
Remove foreign materials.
2 Leveler roller (LR) ASSY not
mounted correctly on the head/
carriage unit
Set the LR ASSY into place, using the LR jigs (LR
positioning jig and LR fitting jig).
3 CR encoder strip stained Replace the encoder strip.
4 Maintenance unit defective Clean the maintenance unit or replace it.