4-2
Confidential
< Requirements >
(1) USB cable (one piece)
(2) PC (Windows
®
XP or later)
Create a temporary folder in the C drive.
(3) Service setting tool (brusbsn.zip)
Make a copy of the service setting tool in the temporary folder in the C drive.
Extract the copied file and run it by double-clicking.
(4) Download utility (FILEDG32.EXE)
Make a copy of the download utility in the temporary folder in the C drive.
(5) Maintenance driver (MaintenanceDriver.zip), if not installed
Make a copy of the maintenance driver in the temporary folder in the C drive.
Extract the copied file and install it, referring to APPENDIX 3 "INSTALLING THE
MAINTENANCE PRINTER DRIVER."
(6) Firmware
LZXXXX_$.pjl (For installing firmware using an external memory or PC)
LZXXXX_$.upd (For installing firmware using a PC)
(7) USB flash memory or SD card
(8) Stylus for touch panel
(9) Print data (Corrugate_BHM13.prn) for adjustment of vertical print lines/software
correction for inclination, corrugation and ruled lines.
(10)Print data for adjusting paper feeding correction values
(For A4-sized paper: pfadj1_A4_BHM13.prn/pfadj2_A4_BHM13.prn)
(For letter-sized paper: pfadj1_LTR_BHM13.prn/pfadj2_LTR_BHM13.prn)
(11)Print data for adjusting margins in borderless printing
(For A4-sized paper: mediaadj_A4_BHM13.prn)
(For letter-sized paper: mediaadj_LTR_BHM13.prn)
(12)Print data for writing head calibration data
(head_calib1_BHM13.prn/head_carib2_BHM13.prn)
(13)ADF copy chart data (chart_BHM13.prn)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
