4-22
Confidential
6.1 Check head nozzles (Maintenance mode 09)
Check head nozzles, referring to Section 2.3 "Check head nozzles."
6.2 Adjustment of vertical print lines/software correction for inclination/
corrugation/ruled lines (Maintenance mode 65)
Refer to Chapter 5, Section 1.3.23 "Adjustment of Vertical Print Lines/Software
Correction for Inclination/Corrugation/Ruled Lines."
6.3 Update paper feeding correction values (Maintenance mode 58)
Refer to Chapter 5, Section 1.3.19 "Updating of Paper Feeding Correction Values."
6.4 Adjust margins in borderless printing (Maintenance mode 66)
Refer to Chapter 5, Section 1.3.24 "Margin Adjustment in Borderless Printing."
6.5 Check printing
To make a final check after replacement of the parts, print test patterns for updating the
paper feeding correction values, adjustment of vertical print lines/software correction
for inclination/corrugation/ruled lines/margins in borderless printing.
Update the paper feeding correction value
Check the test patterns, referring to Chapter 5, Section 1.3.19 "Updating of Paper
Feeding Correction Values."
Adjustment of vertical print lines/software correction for inclination/corrugation/ruled lines
Check the test patterns, referring to Chapter 5, Section 1.3.23 "Adjustment of Vertical
Print Lines/Software Correction for Inclination/Corrugation/Ruled Lines."
Adjust margins in borderless printing
Check the test patterns, referring to Chapter 5, Section 1.3.24 "Margin Adjustment in
Borderless Printing."
To Next Page
Loading...
Need help?
General
Weight and Dimensions
