4-11
Confidential
2 IF YOU REPLACE THE HEAD/CARRIAGE UNIT
<Operations>
2.1 Update the head property data (Maintenance mode 68)
2.2 Perform ink supply purge (Maintenance mode 76)
2.3 Check head nozzles (Maintenance mode 09)
2.4 Adjust head inclination
2.5 Adjustment of vertical print lines/software correction for inclination/corrugation/
ruled lines (Maintenance mode 65)
2.6 Update paper feeding correction values (Maintenance mode 58)
2.7 Adjust margins in borderless printing (Maintenance mode 66)
2.8 Write head calibration data (Maintenance mode 02)
2.9 Check scanning and printing
2.10 Obtain machine information at the user site (Instruction to the end user)
<Requirements>
(1) USB cable (one piece)
(2) PC (Windows
®
XP or later)
Create a temporary folder in the C drive.
(3) Service setting tool (brusbsn.zip)
Make a copy of the service setting tool in the temporary folder in the C drive.
Extract the copied file and run it by double-clicking.
(4) Download utility (FILEDG32.EXE)
Make a copy of the download utility in the temporary folder in the C drive.
(5) Maintenance driver (MaintenanceDriver.zip), if not installed
Make a copy of the maintenance driver in the temporary folder in the C drive.
Extract the copied file and install it, referring to APPENDIX 3 "INSTALLING THE
MAINTENANCE PRINTER DRIVER."
(6) USB flash memory or SD card
(7) Print data (Corrugate_BHM13.prn) for adjustment of vertical print lines/software
correction for inclination, corrugation and ruled lines.
(8) Print data for adjusting paper feeding correction values
(For A4-sized paper: pfadj1_A4_BHM13.prn/pfadj2_A4_BHM13.prn)
(For letter-sized paper: pfadj1_LTR_BHM13.prn/pfadj2_LTR_BHM13.prn)
(9) Print data for adjusting margins in borderless printing
(For A4-sized paper: mediaadj_A4_BHM13.prn)
(For letter-sized paper: mediaadj_LTR_BHM13.prn)
(10)Print data for writing head calibration data
(head_calib1_BHM13.prn/head_carib2_BHM13.prn)
(11)ADF copy chart data (chart_BHM13.prn)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
