5-26
Confidential
(7) Wait for the machine to automatically return to the initial stage of the maintenance
mode and show "**** Active" on the LCD.
Remove the external memory from the machine and keep it in a safe place.
Note: If any of the error messages listed below appears, press the X key, and the
machine returns to the initial stage of the maintenance mode.
Restoration Procedure
(1) Insert the external memory containing the backup data into the memory slot of the
machine in the initial stage of the maintenance mode.
The "**** Active" appears on the LCD. ("****" shows the name of the external
memory inserted.)
Note: - Do not insert more than one external memory at a time.
- If the serial number in the backup data stored in the external memory does
not match that of the machine, data restoration cannot be performed.
(2) Press the 4 and 6 keys in this order.
The "Export to Card" appears on the LCD.
(3) Press the or key until the desired item, any of the following, appears on the
LCD.
"Import from Card" for restoring only user setting information
"Import all" for restoring all backup data including machine information
(4) Press the Mono Start key.
The "********.msd" appears on the LCD. The "********" is unique to each model.
(5) Press the Mono Start key.
The "Import from Card" or "Import all" appears on the LCD again.
(6) Press the Mono Start key.
The "Please wait" appears on the LCD.
Note: Never remove the external memory from the machine when importing is in
progress.
(7) Wait for the machine to automatically return to the initial stage of the maintenance
mode and show "**** Active" on the LCD.
Remove the external memory from the machine and keep it in a safe place.
Note: If any of the error messages shown in "Backup Procedure" appears, press the X
key to return the machine to the initial stage of the maintenance mode.
Error Message Cause
Card is used The external memory is being used by another operation.
Insert Card No external memory is inserted.
No file The file cannot be opened or no "BROTHER" folder exists.
Card Error
Mismatch between the serial number of the machine and that
of the backup data (which is detected only in data restoration).
Machine ID Error Mismatch of serial numbers
Write Error A write error occurs.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
