BRP ROTAX 916 i A Series - Post-Start Engine Checks; Caution Lamp State Check (916 i TYPE C24); Start Engine Procedure; Reduce Throttle Valve for Idle

BRP-Rotax
INSTALLATION MANUAL
NOTICE
In failure conditions the output voltage can exceed the specified limits.
The following measurement is taken at an oil temperature of 135 °C (275 °F).
Figure 3.7: Characteristic curve of internal generators
24–00–00
Page 8
December 01 2023
Effectivity: 916 i A / C24
Edition 0/Rev. 1