BRP ROTAX 916 i A Series - Final Checks and Procedures; Engine Instruments Check - Lane;Ignition; Caution Lamp State Check (916 i TYPE C24) - Final

BRP-Rotax
INSTALLATION MANUAL
Fusebox Regula-
tor B
The Regulator B needs to be connected with the Airframe Ground. The terminal is con-
ducted as a M6 screw connection suitable for cable lug according to DIN 46225 (Tighten-
ing torque: 5.9 Nm (52.5 in. in. lb)).
Figure 3.9: Fusebox -Regulator B
1
Regulator
2
Regulator plate B
3 Ground terminals
Figure 3.10: Fusebox
1
Connector Regulator A
2
Amphenol connector Regulator B
24–00–00
Page 10
December 01 2023
Effectivity: 916 i A / C24
Edition 0/Rev. 1