Canmax CM-2D202 - NEC 2 of 5 Symbology Settings

116
6. SYMBOLOGIES
6-6 NEC 2 of 5
Default All NEC 2 of 5 Settings
6-6-1 NEC 2 of 5 On/Off
On
Off
6-6-2 Check Digit
No Check Digit indicates that the scanner reads and transmits barcode data
with or without a check digit.
When Check Digit is set to Validate, but Not to Transmit, the unit only reads
NEC 2 of 5 barcodes with a check digit, but will not transmit the check digit with
the scanned data
When Check Digit is set to Validate and Transmit, the scanner only reads
NEC 2 of 5 barcodes with a check digit, and will transmit this digit at the end of
the scanned data.
Default = No Check Digit
6-6 NEC 2 of 5
6-6-1 NEC 2 of 5 On/Off
6-6-2 Check Digit