Canmax CM-2D202 - UPC-A Check Digit; UPC-A Number System

132
6. SYMBOLOGIES
6-14-3 UPC-A Check Digit
This selection allows you to specify whether the check digit should be
transmitted at the end of the scanned data or not.
Default = On
On
Off
6-14-4 UPC-A Number System
The numeric system digit of a U.P.C. symbol is normally transmitted at the beginning
of the scanned data, but the unit can be programmed so it will not transmit it.
Default = On
On
Off
6-14-3 UPC-A Check Digit
6-14-4 UPC-A Number System