49
3. INPUT/OUTPUT SETTINGS
3-4-6 LED – Good Read
The LED indicator can be programmed On or Off in response to a good read.
Default = On
LED - Good Read On
LED - Good Read Off
3-4-7 Number of Beeps – Good Read
The number of beeps of a good read can be programmed from 1 - 9. The same
number of beeps will be applied to the beeper and LED in response to a good
read. For example, if you program this option to have five beeps, there will be
five beeps and five LED flashes in response to a good read. The beeps and
LED flashes are in sync with one another. To change the number of beeps,
scan the bar code below and then scan a digit (1-9) bar code and the Save
barcode on the Programming Chart inside the back cover of this manual.
Default = 1
Number of Good Read Beeps/LED Flashes
3-4-6 LED – Good Read
3-4-7 Number of Beeps – Good Read
To Next Page
Loading...
