172
6. SYMBOLOGIES
6-35-3 Aztec Append
This function allows the scanner to append the data from several Aztec bar
codes together before transmitting them to the host computer.
When the scanner encounters an Aztec bar code with the append trigger
character(s), it buffers the number of Aztec bar codes determined by
information encoded in those bar codes.
Once the proper number of codes is reached, the data is output in the order
specified in the bar codes. There are 3 ways to scan appended Aztec Code:
• One scan—Pull the trigger one time and all appended Aztec Codes in the
same image are decoded
• Swipe—Pull and hold down the trigger and scan all appended Aztec Codes
while keeping the trigger pressed. The scanner emits short beeps for each
partial Aztec Code that is scanned and buffered. One long beep is emitted after
the last Aztec Code is scanned and the data is complete. Not compatible with
Presentation mode.
• Point and shoot—Pull the trigger one time for each image. The scanner emits
a short beep for each partial Aztec Code that is scanned and buffered. One
long beep is emitted after the last Aztec Code is scanned and the data is
complete. Not compatible with Presentation mode.
Default = One Scan
One Scan
Swipe
Point and Shoot
6-35-3 Aztec Append
To Next Page
Loading...
