Canmax CM-2D202 - Intermessage Delay

83
4. DATA EDITING
4-5-4 Intermessage Delay
An intermessage delay of up to 5000 milliseconds (in 5ms increments) may be
placed between each scan transmission. Scan the Intermessage Delay bar
code below, then scan the number of 5ms delays, and the Save barcode using
the Programming Chart inside the back cover of this manual.
Intermessage Delay
To remove this delay, scan the Intermessage Delay bar code, then set the
number of delays to 0. Scan the Save barcode using the Programming Chart
inside the back cover of this manual.
4-5-4 Intermessage Delay