Canmax CM-2D202 - Beeper Pitch - Good Read; Beeper Pitch - Error

47
3. INPUT/OUTPUT SETTINGS
3-4-3 Beeper Pitch – Good Read
The beeper pitch codes modify the pitch (frequency) of the beep the scan
engine emits on a good read.
Default = Medium
Low (1600 Hz)
Medium (2400 Hz)
High (4200 Hz)
3-4-4 Beeper Pitch – Error
The beeper pitch codes modify the pitch (frequency) of the sound the scan
engine emits when there is a bad read or error.
Default = Razz
Razz (250 Hz)
3-4-3 Beeper Pitch – Good Read
3-4-4 Beeper Pitch – Error