135
6. SYMBOLOGIES
6-15 UPC-A/EAN-13 with Extended Coupon
Use the following codes to enable or disable UPC-A and EAN-13 with
Extended Coupon Code. When left on the default setting (Off), the scanner
treats Coupon Codes and Extended Coupon Codes as single bar codes.
If you scan the Allow Concatenation code, when the scanner sees the
coupon code and the extended coupon code in a single scan, it transmits both
as one symbology. Otherwise, it transmits the first coupon code it reads.
If you scan the Require Concatenation code, the scanner must see and read
the coupon code and extended coupon code in a single read to transmit the
data. No data is output unless both codes are read.
Default = Off
Off
Allow Concatenation
Require Concatenation
6-15 UPC-A/EAN-13 with Extended Coupon
To Next Page
Loading...
