82
4. DATA EDITING
4-5-3 Interfunction Delay
An interfunction delay of up to 5000 milliseconds (in 5ms increments) may be
placed between the transmission of each control character in the message
string. Scan the Interfunction Delay barcode below, then scan the number of
5ms delays, and the Save barcode using the Programming Chart inside the
back cover of this manual.
Interfunction Delays
Interfunction Delay
To remove this delay, scan the Interfunction Delay barcode, then set the
number of delays to 0. Scan the Save barcode using the Programming Chart
inside the back cover of this manual.
4-5-3 Interfunction Delay
To Next Page
Loading...
