Canmax CM-2D202 - Page 210

210
8. SERIAL PROG COMMANDS
Selection
Setting
* Indicates default
Serial
Command
# Indicates a
numeric entry
Page
Convert UPC-A to EAN-13 UPC-A Converted to EAN-13 UPAENA0 131
*Not to Convert UPC-A UPAENA1 131
UPC-A Check Digit Off
UPACKX0 132
*On UPACKX1 132
UPC-A Number System Off
UPANSX0 132
*On UPANSX1 132
UPC-A Addenda *2 Digit Off UPAAD20 133
2 Digit On
UPAAD21 133
*5 Digit Off UPAAD50 133
5 Digit On UPAAD51 133
UPC-A Addenda Required Required
UPAARQ1 133
*Not Required UPAARQ0 134
UPC-A Addenda Separator Off UPAADS0 134
*On
UPAADS1 134
UPC-A/EAN-13 with
Extended Coupon Code
*Off
CPNENA0 135
Allow Concatenation CPNENA1 135
Require Concatenation CPNENA2 135
Coupon GS1 DataBar Output
*GS1 Output Off
CPNGS10 136
GS1 Output On CPNGS11 136
UPC-E Default All UPC-E Settings UPEDFT 137
UPC-E0 Off
UPEEN00 137
*UPC-E0On UPEEN01 137
*UPC-E1 Off UPEEN10 137
UPC-E1 On UPEEN11 137
UPC-E0 Expand *Off UPEEXP0 138
On
UPEEXP1 138