Handling rolls
Keeping T rack of the Amount of Roll Paper Left
If you have activated automatic monitoring of the remaining roll paper , when the roll is ejected, a barcode with text
is printed on the roll paper that identies the type of paper and amount left. When this function is activated and
barcodes are printed on the roll paper , the type of paper and amount left are automatically detected after rolls are
loaded. The barcode will be cut of f after it has been read.
Note
• If the document is not cut but kept in the printer , only the text message is printed.
Important
• Because this function is not compatible with clear lm, an error message may be displayed ( The roll is
empty . ) after you load clear lm. For this reason, deactivate the function before loading clear lm.
• If the barcode on the roll is not detected, enter the type and length of paper on the Control Panel .
Follow these steps to activate monitoring of the remaining roll paper .
1. Press the Menu button to display MAIN MENU .
2. Press ▲ or ▼ to select Media Menu , and then press the ► button.
3. Press ▲ or ▼ to select ManageRemainRoll , and then press the ► button.
4. Press ▲ or ▼ to select the setting, and then press the OK button.
152 Handling Paper
To Next Page
Loading...
Need help?
Print Specifications
Weight and Dimensions
