Canon imagePROGRAF iPF810 User Manual

Messages regarding paper
The paper is too small.
Cause Corrective Action
Press the Online button to resume printing.
However , note that this error may cause paper jams
and af fect the printing quality .
Adjust the paper size setting in the printer driver to
match the size loaded in the printer as follows.
1. Hold down the Stop button for a second or more
to cancel printing.
2. Change the paper size setting in the printer driver
to the size loaded in the printer and try printing
again.
When the Detect Mismatch menu is set to Pause ,
the paper loaded in the printer is smaller than the
size specied in the printer driver .
Replace the loaded paper with paper of a size that
matches the size setting in the printer driver as
follows.
1. Hold down the Stop button for a second or more
to cancel printing.
2. Replace the loaded paper to match the paper size
setting in the printer driver and try printing again.
When the Detect Mismatch menu is set to W arning ,
the paper loaded in the printer is smaller than the
size specied in the printer driver .
Y ou can continue to print, but note that this error may
cause problems in the printing results.
RollWdthMismatch
Cause Corrective Action
Press the Online button to resume printing.
However , note that this error may cause paper jams
and af fect the printing quality .
Hold down the Stop button for a second or more to
cancel printing.
The roll width set in Fit Roll Paper W idth in the
printer driver does not match the width of the roll
loaded in the printer .
Make sure the roll width selected in the dialog box
displayed when you select Fit Roll Paper W idth in
the printer driver matches the width of the roll loaded
in the printer , and then try printing again.
Error Message 661

Canon imagePROGRAF iPF810 Specifications

Print Specifications

print resolution	2400 x 1200 dpi
line accuracy	±0.1% or Less
minimum line weight	0.02 mm
number of nozzles (Matte Black)	5, 120 Nozzles
number of nozzles (Other Colors)	2, 560 Nozzles per Color
droplet size	4 Picoliter
nozzle pitch (head resolution)	1200 dpi x Two Rows
print-head swath	1.07 inch

Ink and Media

ink type (Dye)	Cyan (C), Magenta (M), Yellow (Y), Black (K)
ink type (Pigment)	Matte Black (MBK)
ink tank shipped with printer	PFI-303 (330ml) MBK, C, M, Y, K
ink tank replacement	PFI-703 (700ml) MBK, C, M, Y, K
media width (Roll Feed)	10" – 44" (254mm – 1118mm)
media width (Cut Sheet)	8" – 44" (203.2mm – 1118mm)
maximum print length (Roll Feed)	59' (18m)
maximum print length (Cut Sheet)	63" (1.6m)
media thickness	0.07 – 0.8mm (2.8 – 31.4mil)
maximum roll outer diameter	5.9" (150mm)

Power and Noise

power supply	AC 100–240V (50-60Hz)
power consumption (Maximum)	190W or Less
power consumption (Standby)	6W or Less
acoustic noise (Operation)	52dB (A) or Less
acoustic noise (Standby)	35dB (A) or Less
acoustic power	6.8 Bels or Less

Operating Environment

temperature	59 – 86 F° (15 – 30 C°)
relative humidity	10 – 80% (No Condensation)

Weight and Dimensions

printer dimensions (iPF810/iPF810 PRO)	45.1" x 74.6" x 50.9" (1144mm x 1893mm x 1291mm)
weight with stand (iPF810/iPF810 PRO)	Approx. 335 lb. (152kg)
printer dimensions (iPF820/iPF820 PRO)	45.1" x 74.6" x 50.9" (1144mm x 1893mm x 1291mm)
weight with stand (iPF820/iPF820 PRO)	Approx. 417 lb. (189kg)
package dimensions (iPF810/iPF810 PRO)	49.8" x 92.5" x 62.4" (1263mm x 2384mm x 1585mm)
package weight (iPF810/iPF810 PRO)	Approx. 664 lb. (301kg)
package dimensions (iPF820/iPF820 PRO)	49.8" x 92.5" x 62.4" (1263mm x 2348mm x 1585mm)
package weight (iPF820/iPF820 PRO)	Approx. 768 lb. (348kg)