Adjusting the feed amount
Adjusting the V acuum Strength (V acuumStrngth)
When printing on heavyweight paper or paper that curls or wrinkles easily , if paper rubs against the printer or
the edge is wrinkled from rubbing, adjusting the level of suction against paper on the Platen may improve
results.
1. Press the Menu button to display MAIN MENU .
2. Press ▲ or ▼ to select Paper Details , and then press the ► button.
3. Press ▲ or ▼ to select the type of paper , and then press the ► button.
4. Press ▲ or ▼ to select V acuumStrngth , and then press the ► button.
5. Press ▲ or ▼ to select the level of suction against paper on the Platen , and then press the
OK button.
Adjustments for Better Print Quality 571
To Next Page
Loading...
