Messages regarding paper
Sheet removed.
Cause Corrective Action
A sheet has come out of the printer during printing.
1. Lift the Release Lever and remove the paper .
2. If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
Sheet printing is selected.
Cause Corrective Action
Load a sheet and try printing again.Y ou have attempted to print a test print sheet or other
printer status information on a sheet, but no sheet
is loaded.
T o print on a roll instead, hold down the Stop button
for more than a second to cancel printing, load a roll,
and then print.
( → P .108)
Regular printing is selected, but a roll is loaded.
Cause Corrective Action
A print job for printing on sheets was sent when a
roll is loaded.
Hold down the Stop button for a second or more to
cancel printing.
Remove the roll and load a sheet of the type and size
of paper you have specied in the printer driver .
( → P .143)
( → P .1 12)
Y ou are using a roll with the Media T ake-up Unit , but
a print job requiring sheets was sent.
1. Press the Stop button for a second to cancel the
job involving sheets.
2. Choose Paper Cutting in the menu.
3. Press the Load/Eject button and remove the roll.
4. Load a sheet and resend the print job.
Paper jam.
Lift the release lever .
Cause Corrective Action
A paper jam occurred in the printer during printing.
1. Lift the Release Lever and remove the jammed
paper .
( → P .147)
( → P .170)
2. If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
666 Error Message
To Next Page
Loading...
