Canon imagePROGRAF iPF810 - Printer Specifications; Specifications

Printer Specications
Printer Specications
Specications
Important
• This information is subject to change as the printer is updated.
• The following values may vary depending on the operating environment.
Printer
Power supply 100-120 V AC (50/60 Hz), 220-240 V AC (50/60 Hz)
During operation 190 W max.
Sleep mode 100-120 V : 5 W max.
(10 W max. when an IEEE 1394 (FireWire) expansion board is
installed.)
220-240 V : 6 W max.
(1 1 W max. when an IEEE 1394 (FireWire) expansion board is
installed.)
Power consumption
Of f 1 W max. ( *1 )
During operation Approx. 52 dB (A) max. (6.8 bels or less)Operating noise
Standby Approx. 35 dB (A) max.
T emperature 15-30°C (59-86°F)Operating
environment
Humidity 10-80%, non-condensing
Dimensions (W × D
× H)
Printer and
Stand (including
Roll Holder and
Stationary Output
Stacker )
1,893 × 975× 1,144 mm (74.5 × 38.4 × 45.0 in)
W eight Printer and Stand
(not including the
Printhead and Ink
T ank )
Approx. 141 kg (310.9 lb)
Space for
installation (W ×
D × H)
Printer only 2,293 × 1,675 × 1,500 mm (90.3 × 65.9 × 59.1 in)
Applicable standards International Energy Star Program, Law on Promoting Green
Purchasing, GPN, RoHS, Eco Declaration, WEEE, U.S.
presidential directives
*1: The printer uses a trace amount of power even when turned of f. T o stop all power consumption,
turn of f the printer and unplug the power cord.
Printer Parts 99