Cisco 5510 - ASA SSL / IPsec VPN Edition Configuration Guide

Contents
xxi
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
NAT Types 26-2
Static NAT 26-3
Information About Static NAT 26-3
Information About Static NAT with Port Translation 26-3
Information About One-to-Many Static NAT 26-6
Information About Other Mapping Scenarios (Not Recommended) 26-7
Dynamic NAT 26-8
Information About Dynamic NAT 26-9
Dynamic NAT Disadvantages and Advantages 26-10
Dynamic PAT 26-10
Information About Dynamic PAT 26-10
Dynamic PAT Disadvantages and Advantages 26-11
Identity NAT 26-11
NAT in Routed and Transparent Mode 26-12
NAT in Routed Mode 26-13
NAT in Transparent Mode 26-13
How NAT is Implemented 26-15
Main Differences Between Network Object NAT and Twice NAT 26-15
Information About Network Object NAT 26-16
Information About Twice NAT 26-16
NAT Rule Order 26-19
NAT Interfaces 26-20
Mapped Address Guidelines 26-20
DNS and NAT 26-21
Where to Go Next 26-23
CHAPTER 27 Configuring Network Object NAT 27-1
Information About Network Object NAT 27-1
Licensing Requirements for Network Object NAT 27-2
Prerequisites for Network Object NAT 27-2
Guidelines and Limitations 27-2
Configuring Network Object NAT 27-3
Configuring Dynamic NAT 27-3
Configuring Dynamic PAT (Hide) 27-7
Configuring Static NAT or Static NAT with Port Translation 27-11
Configuring Identity NAT 27-14
Configuration Examples for Network Object NAT 27-17
Providing Access to an Inside Web Server (Static NAT) 27-18

Cisco 5510 - ASA SSL / IPsec VPN Edition Specifications

General

Brand	Cisco
Model	5510 - ASA SSL / IPsec VPN Edition
Category	Firewall
Language	English