Cisco 5510 - ASA SSL / IPsec VPN Edition Configuration Guide

Contents
xxii
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
NAT for Inside Hosts (Dynamic NAT) and NAT for an Outside Web Server (Static NAT) 27-20
Inside Load Balancer with Multiple Mapped Addresses (Static NAT, One-to-Many) 27-25
Single Address for FTP, HTTP, and SMTP (Static NAT with Port Translation) 27-29
DNS Server on Mapped Interface, Web Server on Real Interface (Static NAT with DNS
Modification)
27-32
DNS Server and Web Server on Mapped Interface, Web Server is Translated (Static NAT with DNS
Modification)
27-35
Feature History for Network Object NAT 27-37
CHAPTER 28 Configuring Twice NAT 28-1
Information About Twice NAT 28-1
Licensing Requirements for Twice NAT 28-1
Prerequisites for Twice NAT 28-2
Guidelines and Limitations 28-2
Configuring Twice NAT 28-3
Configuring Dynamic NAT 28-3
Configuring Dynamic PAT (Hide) 28-7
Configuring Static NAT or Static NAT with Port Translation 28-11
Configuring Identity NAT 28-15
Configuration Examples for Twice NAT 28-18
Different Translation Depending on the Destination (Dynamic PAT) 28-19
Different Translation Depending on the Destination Address and Port (Dynamic PAT) 28-28
Feature History for Twice NAT 28-37
PART 6 Configuring Service Policies
CHAPTER 29 Configuring a Service Policy 29-1
Information About Service Policies 29-1
Supported Features for Through Traffic 29-1
Supported Features for Management Traffic 29-2
Feature Directionality 29-2
Feature Matching Within a Service Policy 29-3
Order in Which Multiple Feature Actions are Applied 29-4
Incompatibility of Certain Feature Actions 29-5
Feature Matching for Multiple Service Policies 29-5
Licensing Requirements for Service Policies 29-6
Guidelines and Limitations 29-6
Default Settings 29-7

Cisco 5510 - ASA SSL / IPsec VPN Edition Specifications

General

Brand	Cisco
Model	5510 - ASA SSL / IPsec VPN Edition
Category	Firewall
Language	English