29-2
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 29 Configuring a Service Policy
Information About Service Policies
Supported Features for Management Traffic
Service policy rules support the following features for management traffic:
• Application inspection for RADIUS accounting traffic—See Chapter 40, “Configuring Inspection
for Management Application Protocols.”
• Connection limits—See Chapter 48, “Configuring Connection Settings.”
Feature Directionality
Actions are applied to traffic bidirectionally or unidirectionally depending on the feature. For features
that are applied bidirectionally, all traffic that enters or exits the interface to which you apply the policy
map is affected if the traffic matches the class map for both directions.
Table 29-1 Service Policy Rule Features
Feature See:
Application inspection (multiple types)
• Chapter 36, “Getting Started With Application Layer
Protocol Inspection.”
• Chapter 37, “Configuring Inspection of Basic Internet
Protocols.”
• Chapter 39, “Configuring Inspection of Database and
Directory Protocols.”
• Chapter 40, “Configuring Inspection for Management
Application Protocols.”
• Chapter 38, “Configuring Inspection for Voice and
Video Protocols.”
CSC Chapter 55, “Configuring the Content Security and Control
Application on the CSC SSM.”
IPS Chapter 54, “Configuring the IPS Application on the
AIP SSM and SSC.”
NetFlow Secure Event Logging filtering Chapter 72, “Configuring NetFlow Secure Event Logging
(NSEL).”
QoS input and output policing Chapter 49, “Configuring QoS.”
QoS standard priority queue Chapter 49, “Configuring QoS.”
QoS traffic shaping, hierarchical priority
queue
Chapter 49, “Configuring QoS.”
TCP and UDP connection limits and
timeouts, and TCP sequence number
randomization
Chapter 48, “Configuring Connection Settings.”
TCP normalization Chapter 48, “Configuring Connection Settings.”
TCP state bypass Chapter 48, “Configuring Connection Settings.”
To Next Page
Loading...
Need help?
General
