Cisco ASR 9000 Series - Page 14

EIGRP Features 303
EIGRP Components 303
EIGRP Configuration Grouping 304
EIGRP Configuration Modes 304
EIGRP Interfaces 305
Redistribution for an EIGRP Process 306
Metric Weights for EIGRP Routing 306
Mismatched K Values 306
Goodbye Message 307
Percentage of Link Bandwidth Used for EIGRP Packets 307
Floating Summary Routes for an EIGRP Process 307
Split Horizon for an EIGRP Process 309
Adjustment of Hello Interval and Hold Time for an EIGRP Process 310
Stub Routing for an EIGRP Process 310
Route Policy Options for an EIGRP Process 311
EIGRP Layer 3 VPN PE-CE Site-of-Origin 312
Router Interoperation with the Site-of-Origin Extended Community 312
Route Manipulation using SoO match condition 313
EIGRP v4/v6 Authentication Using Keychain 314
EIGRP Wide Metric Computation 314
EIGRP Multi-Instance 315
EIGRP Support for BFD 315
How to Implement EIGRP 315
Enabling EIGRP Routing 315
Configuring Route Summarization for an EIGRP Process 317
Redistributing Routes for EIGRP 319
Creating a Route Policy and Attaching It to an EIGRP Process 321
Configuring Stub Routing for an EIGRP Process 322
Configuring EIGRP as a PE-CE Protocol 323
Redistributing BGP Routes into EIGRP 325
Monitoring EIGRP Routing 327
Configuring an EIGRP Authentication Keychain 329
Configuring an Authentication Keychain for an IPv4/IPv6 Interface on a Default
VRF 329
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
xiv
Contents