Cisco ASR 9000 Series Routing Configuration Guide

SUMMARY STEPS
1.
configure
2.
route-policy name
3.
set extcommunity cost { cost-extcommunity-set-name | cost-inline-extcommunity-set } [ additive ]
4.
end-policy
5.
router bgp as-number
6.
Do one of the following:
•
default-information originate
•
aggregate-address address/mask-length [ as-set ] [ as-confed-set ] [ summary-only ] [ route-policy
route-policy-name ]
•
address-family { ipv4 unicast | ipv4 multicast | ipv4 tunnel | ipv6 unicast | vpnv4 unicast
} redistribute connected [ metric metric-value ] [ route-policy route-policy-name ]
•
address-family { ipv4 unicast | ipv4 multicast | ipv4 tunnel | ipv6 unicast | vpnv4 unicast
} redistribute eigrp process-id [ match { external | internal }] [ metric metric-value ] [
route-policy route-policy-name ]
•
address-family { ipv4 unicast | ipv4 multicast | ipv4 tunnel | ipv6 unicast | vpnv4 unicast
} redistribute isis process-id [ level { 1 | 1-inter-area | 2 }] [ metric metric-value ] [
route-policy route-policy-name ]
•
address-family { ipv4 unicast | ipv4 multicast | ipv4 tunnel | ipv6 unicast | vpnv4 unicast
} redistribute ospf process-id [ match { external [ 1 | 2 ] | internal | nssa-external [ 1 | 2
]}] [ metric metric-value ] [ route-policy route-policy-name ]
7.
Do one of the following:
•
address-family { ipv4 unicast | ipv4 multicast | ipv4 tunnel | ipv4 mdt | ipv6 unicast | ipv6
multicast | vpnv4 unicast | vpnv6 unicast } redistribute ospfv3 process-id [ match { external
[ 1 | 2 ] | internal | nssa-external [ 1 | 2 ]}] [ metric metric-value ] [ route-policy
route-policy-name ]
•
address-family { ipv4 unicast | ipv4 multicast | ipv4 tunnel | ipv4 mdt | ipv6 unicast | ipv6
multicast | vpnv4 unicast | vpnv6 unicast } redistribute rip [ metric metric-value ] [
route-policy route-policy-name ]
•
address-family { ipv4 unicast | ipv4 multicast | ipv4 tunnel | ipv4 mdt | ipv6 unicast | ipv6
multicast | vpnv4 unicast | vpnv6 unicast } redistribute static [ metric metric-value ] [
route-policy route-policy-name ]
•
address-family { ipv4 unicast | ipv4 multicast | ipv4 tunnel | ipv4 mdt | ipv6 unicast | ipv6
multicast | vpnv4 unicast | vpnv6 unicast } network { ip-address/prefix-length | ip-address
mask } [ route-policy route-policy-name ]
•
neighbor ip-address remote-as as-number address-family { ipv4 unicast | ipv4 multicast
| ipv4 tunnel | ipv4 mdt | ipv6 unicast | ipv6 multicast | vpnv4 unicast | vpnv6 unicast }
•
route-policy route-policy-name { in | out }
8.
commit
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
118
Implementing BGP
Configuring the BGP Cost Community

Cisco ASR 9000 Series Specifications

General

Brand	Cisco
Model	ASR 9000 Series
Category	Network Router
Language	English